megantech
Union Jack

PTFE High Performance (HP) Stirrer Shaft Guide



HIGH PERFORMANCE (HP) SHAFT GUIDE  FOR STANDARD TAPER GROUND GLASS JOINTS

The HP Shaft Guides provide an effective guide for use with glass and metal Shaft Stirrers over a wide range of temperature without shedding particles from a specially formulated PTFE-PEEK seal whilst maintaining vacuum.

In the version designated .PK a moulded-in PTFE-PEEK guide ring located at the end of the taper provides a guide to assist alignment of the shaft.

For the PEEK version use the suffix .PK -  eg, 005.0.0619.PK

Note: PEEK has reduced chemical resistance compared to PTFE and may be affected by acids, phenols and halogen based compounds.

The maximum recommended speeds are 500rpm continuous or 800rpm intermittent.


Guide Drawing


Full Length Cone Type "A"

Product number

Shaft Diameter

mm

Cone Size

Height

mm

Ring Diameter

mm

005.0.0619 6 19/22 60 42
005.0.0624 6 24/40 60 42
005.0.0819 8 19/38 60 42
005..0.0824 8 24/40 60 42
005.0.1024 10 24/40 60 42
005..0.1029 10 29/42 60 50
005.0.1034 10 34/45 60 50
005.0.1045 10 45/50 60 56
005.0.1229 12 29/42 70 50
005.0.1634 16 34/45 70 50
005.0.1945 19 45/50 70 58


Medium Length Cone Type "B"

Product number

Shaft Diameter

mm

Cone Size

Height

mm

Ring Diameter

mm

005.00.0619 6 19/26 60 42
005..00.0624 6 24/29 60 42
005.00.0819 8 19/26 60 42
005.00.0824 8 24/29 60 42
005.00.1024 10 24/29 60 42
005.00.1029 10 29/32 60 58
005.00.1045 10 45/40 60 50
005.00.1229 12 29/32 60 50
005.00.1634 16 34/35 70 50
005.00.1645 16 45/40 70 58
005.00.1945 19 45/40 70 58



megantech